Dimmer
Sleep Timer
Timer 1
You can dim the front panel’s display.
Use the DIMMER button to cycle between these settings.
FL Dimmer1:
Medium brightness
FL Dimmer2:
Minimum brightness
DIM OFF (default):
Full brightness
<This function will be cancelled when the STANDBY/ON switch is pressed.
The power can be switched off after a specified amount of time.
Press the SLEEP button repeatedly until desired time appears on the display.
SLEEP 90, 60, 30, 20 or 10:
The power will be switched off 90, 60, 30, 20 or 10 minutes later.
OFF:
The sleep timer is off.
<If you want to check the remaining time, press the SLEEP button once. The remaining time will be displayed for 5 seconds, and then return to the normal display.
STANDBY/ON | MULTI JOG |
|
|
TIMER SET
< The unit can be programmed to turn on and off at a specified time.
< Adjust the clock before setting the timer (see page 13).
< To turn the unit on with an FM or AM staion, preset a station (and remember the preset channel number) before setting the timer (see page 16).
1 Press the TIMER SET button.
“ON TIME” appears on the display, and the “hour” value starts blinking.
<When no button is pressed for 20 seconds, the timer setting mode will be cancelled.
2Turn the MULTI JOG knob to set the start time (hour), and then press the TIMER SET button.
The “minutes” value starts blinking.
3Turn the MULTI JOG knob to set the start time (minute), and then press the TIMER SET button.
“OFF TIME” appears on the display, and the “hour” value starts blinking.
ENGLISH
20 | 21 |