Getting Started

The SR-LX5i comes mounted with an adapter “60GB (color) + Photo 40/60GB”. To play your iPod through the SR-LX5i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below.

1.Remove the adapter from the Dock of the SR-LX5i.

Hold the left and right sides of the adapter and gently pull it up.

2.Choose the Dock adapter that fits your iPod mobile digital device.

<Use a commercially available adapter to play iPod with dock connector.

3.Insert the adapter into the Dock of the SR-LX5i.

Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight “click” is heard indicating the adapter is inserted correctly.

1

2

<When you need to remove the adapter, hold the left and right sides of the adapter and gently pull it up.

Docking an iPod to this system

iPod video output

Make the following settings on your iPod’s menu to output video to a TV via this system’s dock.

In the [Video] menu, select [Video Settings]. Set [TV OUT] to [On] or [Ask]. If you have set [TV OUT] to [Ask], your iPod prompts you each time you play a video to specify whether to output it to a TV.

Note:

If you output video to a TV from your iPod, the video is not displayed on the iPod’s screen.

iPod touch does not contain this menu. You will have to specify whether to a output video to a TV each time you play it.

Using the alarm on your iPod touch

If you specify [Slide to power off] on your iPod touch, you cannot use the alarm even if the iPod touch is docked to this system.

To use the alarm on your iPod touch, do not select [Slide to power off]. (The screen can be turned off without any problem.)

If Video is displayed on your iPod touch’s screen, you cannot use the alarm even if the iPod touch is docked to this system.

To use the alarm on your iPod touch, select any item other than Video.

Compatible iPod Software

In case your iPod will not work with the SR-LX5i or with the remote control unit, software update may solve the problem. Visit the Apple website and download the latest iPod Software.

http://www.apple.com/ipod/download/

10