Maintenance
EN
Cleaning the exterior
•Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth
•Clean the exterior with a soft clean cloth or slightly moistened chamois leather. DO NOT use solvents as it may cause damage to the unit.
•If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth.
•Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface.
Handling CDs
•Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole.
•Do not affix labels or adhesive tapes to the label surfaces. Do not scratch or damage the label.
•CDs rotate at high speeds inside the player. Do not use damaged (cracked or warped) CDs
•Make sure CDs are stored in their original case after use. Keep them away from damp, humid or abnormally heated places.
Cleaning CDs
•Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter.
12 
CD Lens Care
•When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner.
Technical Specification
Power supply: 230V~50Hz Dimensions ( H x W x D mm): Unit size - 152 x 368 x 279
CD player: Response curve (+/- 2dB): 60Hz to 20 kHz
Rating Plate: Look for it at the bottom of the set.
TM9235 EN | 16 | 12/10/04, 10:32 AM |
