43
Frequently Asked Questions
SatetyWarningsIntroducingthe LCD TVInstalling the LCD TVUsingThe FeaturesTroubleshootingSpecifications
Question:Solution:
Ihave tuned in Digital TV but
I am not receivingany or all of the
channelsand/orthechannelsIreceive
are breaking up
I have insertedadisc but it is not playing
I would like to connect an external
amplifier
I haveconnected the TV to my VCRvia
SCART but it is not recording
I have inserted my iPod but the iPod
menu is not being displayed (iPod
Connecting remains on screen)
1) Ensureyouhave inserted putthedisc
in facing the correct way forward
2) Ensurethe disc is cleanand is not
scratched
3) Some copied discs will not play.
4) Check the DVD is a region 2 disc – to change
the region of the DVD player, refer to section
‘Changing Regions’.
You require a 3.5mm audio cable to phono
(Red & White connections), this can be
connected into the rear o f the T V stand and
to the external amplifier
In addition to connectingvia SCART,you
shouldconnect the aerialcablefromthe
wall socket to VCR andanotheraerial
cable from the VCR to the T V
1) Remove the iPod from dock, switch off and
then on both the iPod and television in turn.
Then re-insert the iPod into the docking station.
2) Update the firmware on the iPod.
a) Connect your computer to the Internet (if you
have broadband, it's probably already connected).
b) Connect your iPod to your computer.
c) Go to Start | All Programs | iPod | iPod Updater
20xx-xx-xx (it'll have the date Apple released it
in the title).
d) Run iPod Updater.
If you try to update your iPod's firmware and get
an error message, chances are that means you
need to go to apple.com/ipod/download and get
the latest version of the iPod Updater software
1) Check you are i n an area that ca n
receive Freeview. V isit
www.freeview.co.uk o r call
08701111270.
2) Check you are using an aerial that is
able to receive a good digital signal. I n
most cases, you will need an outdoor
digital hi-gain/wideband aerial. In areas
that have excellent Freeview coverage,
you may be able to use a loft type aerial
but it is highly likely t hat you will also
need to connect a booster between the
back of the TV and the TV aerial wall
socket. Unfortunately, to receive a good
enough digital signal, it is not possible to
use a portable/indoor type aerial.
This may change once the analogue
signal is switched off in 2012 and the
Digital signal strength is increased.
19_36 22_36 english manual page Page 1 13. 8. 2009 13:25:09