GETTING STARTED

CONNECTING POWER

Before connecting the power, check that the mains voltage on the rating plate of the AC adaptor is the same as the voltage in your area.

•Plug the DC cord from the AC adaptor into the DC jack on the back of the unit.

•Plug the AC adaptor into the wall socket and switch the mains power on.

The unit is now ready for use.

NOTE:- The AC adaptor may become warm during operation - this is normal.

POWER CONTROL

STANDBY CONTROL

To turn the docking station on:

•Press thebutton.

The unit will switch on and the buttons on the top panel will light.

To turn the docking station off:

•Press thebutton.

The unit will switch off. When set to Standby the lights in the top panel buttons will switch off.

Auto Standby:

The unit will also set to standby automatically, approximately two minutes after music has finished playing from a docked iPod or a source connected to the Audio Input jack.

DOCKING AN iPod

DOCKING YOUR iPod

To dock your iPod:

•Set the unit to Standby.

•Check that the correct iPod adaptor is fitted to the docking bay (see previous page).

•Locate the iPod on the Docking Connector and press it gently home.

The iPod is now ready to play.

To remove your iPod from the dock:

•Set the unit to Standby.

•Grip the iPod at the sides.

•Lift the iPod gently from the dock.

CHARGING AN iPod

When an iPod is docked, the iPod will begin to charge automatically.

NOTE:- The iPod will charge at all times that the unit is connected to mains power.

PLAYING FROM AN iPod

Playing from a docked iPod:

•Set the iPod to play.

You can also operate your iPod functions from the control panel or the remote control.

iPod playback functions:

•Press the /, button to toggle between Play and Pause mode at any time.

•Press the } or { button on the remote control to select the next or previous track on your iPod.

•Press the button to scroll through the repeat modes

available on the iPod.

The display on the iPod will show the repeat mode set.

•Press thebutton to switch shuffle mode on or off. The display on the iPod will show if shuffle mode is set.

iPod menu functions:

When an iPod is docked and playing you can navigate the menus from the keys on the control panel or remote control.

•To move up through the iPod menu, press Menu.

•To scroll up and down options displayed on the iPod menu, press the Mor Nbutton.

•To select menu items, press the Enter button on the remote control.

7