3-134
Section 3 — Menu Descriptions

Load File Menu

From the Disk menu, press the Load file> button to display the
Load File menu. This menu will only display if the selected file is
an E-MEM register.
M/E 1 through DPMs 1-4 — Include or omit portions of the selected
file before loading it from disk into the switcher.
E-MEM LOAD SELECT — Enables loading of the selected E-MEM
REGISTER, the E-MEM BANK containing the selected register, or E-
MEM ALL (all 100 E-MEM registers).
NOTE:
It takes approximately 6 minutes to load all 100 registers, even
if most of them are empty. You may prefer to load only specific banks.
DO LOAD — Brings up the Confirm File Load menu, which allows
you to DO LOAD or CANCEL.
LOAD FILE MENU
NO LOAD NO LOAD
LOAD
disk / load file
E-MEM
LOAD
SELECT
M/E 2M/E 1 BKGD DPMs
1-4MISC DO
LOAD
LOAD
NO LOAD
LOAD
NO LOAD
LOAD
NO LOAD
LOAD
Load file:
/FLOPPY/ABLE.R01
E-MEM
BANK E-MEM
ALL
E-MEM
REGISTER