Tuto r ial s
AWG5000 Series Quick Start User Manual 73
Editing a Sequence
1. Recall the default setup.
2. Select Sequence from the Run Mode
page of the Settings window.
3. Select *Sine960 from the Predefined
page of the Waveform List window, and
set the waveform to the first cell of Ch1
sequence.
Refer to page 24 to learn how to assign
an existing waveform to a cell in the
sequence.
4. Select *Triangle960 from the
Predefined page of the Waveform List
window, and set the waveform to the
second cell of Ch1 sequence.
5. Create a sine waveform with the
following attributes and set the wave-
form to the third cell of Ch1 sequence.
■Waveform Length: 960 points
■Cycles: 5
■Amplitude: 1.0 Vp-p
■Offset: 0.0 V
■Waveform N ame: Si ne-1
6. Select the first element in the Sequence
window. The selected cell is high-
lighted.
1
2
3
4
5
6