Tektronix DPO4000, MSO4000 BUS:B<x>:SPI{:SELect|:SS}:SOUrce, BUS:B<x>:STATE

Commands Listed in Alphabetical Order
Group Bus
Syntax BUS:B<x>:SPI{:SELect|:SS}:POLARity {LOW|HIGH}
BUS:B<x>:SPI{:SELect|:SS}:POLARity?
Arguments LOW specifies an active low polarity.
HIGH specifies an active high polarity.
BUS:B<x>:SPI{:SELect|:SS}:SOUrce
Sets or returns the SPI SS source for bus <x>, where x is the bus number.
Conditions This command requires a DPO4EMBD application module.
Group Bus
Syntax BUS:B<x>:SPI{:SELect|:SS}:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:SPI{:SELect|:SS}:SOUrce?
Arguments CH1–CH4 or D0-D15 is the channel to use as the SPI SS source.
BUS:B<x>:STATE
Sets or returns the on/off state of bus <x>, where x is the bus number.
Group Bus
Syntax BUS:B<x>:STATE {<NR1>|OFF|ON}
BUS:B<x>:STATE?
Related Commands SELect:BUS<x>
Arguments ON or <NR1> ≠0 turns on the bus.
OFF or <NR1> =0turnsoffthebus.
2-110 MSO4000 and DPO4000 Series Programmer Manual