Commands Listed in Alphabetical Order
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:LEVel {<NR3>|TTL}
SEARCH:SEARCH<x>:TRIGger:A:LEVel?
Arguments <NR3> specifies the trigger level, in volts.
TTL specifies a preset TTL high level of 1.4V.
SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>Sets or returns the level for an edge trigger search to determine where to place a
mark. SEARCH<x> is the search number and CH<x> is the channel number. Each
channel can have an independent level.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|TTL}
SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?
Arguments <NR3> specifies the trigger level in volts.
TTL specifies a preset TTL high level of 1.4 V.
SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH[1]Sets or returns the math waveform level for an edge trigger search to determine
where to place a mark. <x> is the search number. The value of MATHis 1 for
all oscilloscopes.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH {TTL}
SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH?
Arguments TTL specifies a preset TTL high level of 1.4 V.
MSO4000 and DPO4000 Series Programmer Manual 2-363