EDIT Menu
Compare...Used to compare the waveform in the area designated by the vertical bar cursors with the waveform in another editing area.
In this example, you will select three waveforms in the waveform editor. The following procedure starts in the initial EDIT menu.
1.Select New Waveform from the side menu. The new waveform will be displayed in area 1.
2.Press Select/Open from the bottom menu. In the side menu, ªWaveform1º refers to the waveform file in editing area 1.
3.Select Another Waveform from the side menu. A file list will appear, allowing you to select the waveform file to be displayed in editing area 2.
The top item in the list (New Waveform) is used to create a new waveform file. The subsequent items are the names of existing waveform files. See Figure 3
Figure 3 9: Menu Display When Another Waveform is Selected
4.Using the general purpose knob, select New Waveform. The new waveform file created in this step will be assigned to editing area 2.
AWG2021 User Manual | 3 17 |