EDIT Menu

 

 

 

 

 

 

 

 

 

Absolute

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Square

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Type

 

 

Cube

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Square Root

Operation ￿More 3 of 3￿

 

Single Waveform

 

 

 

 

 

 

Normalize

 

 

 

 

 

 

 

 

 

 

 

 

Integral

 

Math...

 

 

 

 

 

 

 

 

 

Go Back

 

Differential

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Execute

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To derive the Absolute value for the amplitude of a sine wave between the vertical bar cursors:

1.Create the sine wave to be subjected to Absolute calculation. Figure 3 -41 shows the sine wave before calculations are performed.

Figure 3 ￿41: Waveform Example before Calculation

2.Press the CURSOR button on the front panel.

3.Using the general purpose knob, move the left and right vertical bar cursors to define the area for calculation.

4.Select Single Waveform Math... from the third page of the side menu (More 3 of 3).

5.Press the Type button in the sub-menu and select Absolute.

6.Select Execute from the sub-menu. The absolute value will be derived for the section of the waveform located between the vertical bar cursors. Figure 3 -42 shows the waveform after calculation.

3 ￿64

AWG2021 User Manual