EDIT Menu
Editing Waveform Data Waveform data can be edited at the waveform point, regardless of what item is selected in the bottom menu.
Move the line cursor to the data point to be edited.
Editing Waveform Data in Table Display
1.Press the CURSOR button on the front panel to move the line cursor.
2.When the CURSOR button is pressed, the active line cursor is toggled between Upper and Lower.
3.Use the general purpose knob to move the active line cursor to the time or point value to be edited.
Enter the waveform data
4.Press the VALUE button on the front panel to input the waveform data with the set cardinal number.
Within the inverted display active line cursor is a block cursor. The data in the block cursor can be changed.
5.Use the z and buttons on the front panel to move the block cursor to the data to be changed.
When the block cursor is at the left end of the DATA, pressing the z button moves the block cursor to MARKER for the previous waveform point or time value. When the block cursor is at the MARKER, pressing the button moves the block cursor to the left and of the DATA for the subse- quent waveform point or time value.
6.Data can be input with the numeric keys. Pressing numeric or character keys unrelated to the cardinal number you have designated will have no effect on the data.
When a number or character is input, the block cursor moves to the next character to the right.
Use Operation to edit waveform data for the area between the upper and lower line cursors.
The following list shows the names and functions of the items in the side menu.
Cut | Cutting waveforms |
Copy to Buffer | Copying waveforms |
Paste from Buffer | Pasting waveforms |
Insert Other Waveform | Inserting other waveform data |
AWG2021 User Manual | 3 135 |