EDIT Menu
NOTE. When creating a sequence file you cannot use source±sequence files that contain other sequence files. If you try to do this, a message will be displayed. In this case, you can use the Insert Contents of Sequence item to develop the sequence and insert it.
1.Select Operation from the bottom menu.
2.Press the front panel CURSOR button.
3.Use the general purpose knob to select the line where the sequence file is to be inserted from the Destination list. The file is inserted directly before the inverted display cursor in the Destination list.
4.Press the front panel VALUE button.
5.Use the general purpose knob to select the sequence file from the Catalog. The Insert Contents of Sequence item will appear in the side menu.
6.Select Insert Contents of Sequence from the side menu. The contents of the selected sequence file are inserted directly before the inverted display cursor in the Destination list.
Sequence File Display Use Show Overview from the bottom menu to display the waveform for the created or edited sequence file.
1.Select Show Overview from the bottom menu.
The waveform will be displayed, together with such information as the voltage indicated by the vertical axis, the waveform point size and the clock frequency. Figure 3
AWG2021 User Manual | 3 169 |