EDIT Menu
Editing Functions When you select Operation in the bottom menu, the following items appear in the side menu:
Cut Step
Copy Step
Paste Step
Insert New Step
Append New Step
Insert Current Setup
Swap Channel Contents...
Cutting a Step. Use Cut Step if you wish to delete a step in the autostep file that you have programmed.
1.Select Operation from the bottom menu.
2.Using the z and buttons on the front panel, move to the step to be deleted.
3.Select Cut Step from the side menu.
When Cut Step is selected, the current step is deleted. All of the steps after the one that you have deleted will move up one step. To restore this step to its original state, select Undo from the bottom menu or Paste from Buffer from the side menu.
Copying and Pasting a Step. Use the Copy Step and Paste Step items to copy a step in the program and paste it to another step.
1.Move to the step to be copied, using the same procedure as in ªCutting a Stepº above.
2.Select Copy Step from the side menu.
When Copy Step is selected, the current step is placed in the paste buffer. This item has no effect on the CRT display.
3.Use the z and buttons on the front panel or the Jump item in the bottom menu to move to the step to which the step in the paste buffer is to be pasted.
4.Select Paste Step from the side menu.
All of the steps after the one that has been pasted will move down one step.
3 186 | AWG2021 User Manual |