UTILITY Menu
Figure 3 186: Menu Displayed When RS232C is Selected
Baudrate | Sets the transmission rate. The transmission rate of |
| 300, 600, 1200, 2400, 4800, 9600, and 19200 can be |
| selected with the general purpose knob. Set this |
| parameter to the same value as set on the computer. |
Parity | Sets the error detection method. The general purpose |
| knob is used to select parity of None, Odd, or |
| Even. Set this parameter to match the connected |
| computer's parity. |
Data Bits | Selects 7 or 8 data bits. Set this parameter to match |
| the connected computer's data bits. |
Stop Bits | Selects 1 or 2 stop bits. Set this parameter to match |
| the connected computer's stop bits. |
Flagging | Selects None, Soft, or Hard. This item is used to |
| announce that the input buffer is full. Until the |
| transmission allowed instruction is issued, the other |
| device stops the data transfer. |
AWG2021 User Manual | 3 277 |