UTILITY Menu

with the exception of Date Time (date and time) to be restored to their default settings. Default settings consist of the factory settings and the following items:

Remote Port

GPIB

GPIB Operating Mode

Talk/Listen

GPIB Address

1

RS-232-C Parameters

 

Baudrate

9600

Data Bits

8

Parity

None

Stop Bits

1

Flagging

None

￿￿UTION￿ Once deleted, data cannot be restored.

1.Select Misc from the bottom menu.

2.Select Config... from the side menu.

3.Select Secure Erase Memory from the sub-menu.

4.The following message will appear, asking you to confirm that you really want to delete the data from memory:

Initializes both catalog memory and NVRam then puts all setups in the factory defaults.

Answer Cancel or O.K. If you select O.K., all data will be deleted from memory and settings will be restored to factory defaults, and then the SETUP menu will appear.

Remote Port Settings. The instrument's rear panel has two remote control interface ports: IEEE STD 488 (GPIB) and RS-232-C. (Note: There is no RS-232-Cport when Option 03 or Option 04 has been installed.) Select the desired port, depending on which interface you will be using.

1.Select Misc from the bottom menu.

2.Select Config... from the side menu.

3.Press the Remote Port button in the sub-menu and select either GPIB or RS232C. The remote interface port that you have selected will be displayed on the left side of the status line at the top of the screen.

AWG2021 User Manual

3 ￿285