Appendix E: Functional Operation Summary
Table E"2: Output Signal Amplitude - External
Modulation
External Modulation Signal | Output Signal Amplitude |
|
|
0 | 50% of set vlue |
|
|
1 | 100% of set vlue |
|
|
0% | |
|
|
With ±1 V input, 100% amplitude modulation is possible. Figure
Figure E"13: 100% Amplitude Modulation
Internal AM Mode. This mode can be used when the CH2 output Option 02 is installed. This mode amplitude modulates the CH1 signal with the CH2 signal. Unlike the external AM mode discussed above, in order for this circuit to also be used as a multiplier, such operations as automatically applying an offset to the CH2 signal are not done.
100% modulation occurs when the CH2 signal is 5 V (full scale). When this signal is negative, the CH1 signal is inverted. The value calculated with 5 V set as 100% is displayed at the bottom right of the SETUP menu CRT screen.
CH2 : OFFUpper : 100.00%
50 W | Lower : 0.00% |
E"14 | AWG2021 User Manual |