Operating Examples
Example 2: Output of a Waveform Using the Sample Waveform Library Disk
Loading Sample Waveforms
In Example 2, you will output a waveform using the sample waveform library disk, a standard accessory included with the instrument.
The sample waveform should be loaded from the floppy disk to the internal memory of the instrument.
1.Press the LOAD/SAVE button in the MENU column.
2.Select Device from the bottom menu.
3.Select Disk from the side menu.
4.Select Load from the bottom menu.
5.Insert the sample waveform library disk that comes with this instrument into the floppy disk drive.
NOTE. Do not remove the floppy disk while the floppy disk drive is operating. This can destroy the data and cause errors.
Figure 2 %15: Inserting the Floppy Disk
The files will be displayed in the lower box of the LOAD menu. Figure 2
2 %28 | AWG2021 User Manual |