Operating Examples

Creating Waveforms You will now add a noise waveform to the sine waveform. Arithmetically

1.Select New Waveform from the side menu in the initial EDIT menu.

2.Select Standard Waveform from the bottom menu.

3.Select Amplitude from the side menu.

4.Press ª1º and ENTER in that order.

5.Check to make sure that the parameters for other items in the side menu are set to the values shown below. If they are different, change them to the values shown below.

Type

Sine

Cycle

1.0

Offset

0.0000

6.Select Execute from the side menu.

The sine wave shown in Figure 2 -35 will be created.

Figure 2 ￿35: Creating a Sine Wave

7.Select Type from the side menu.

2 ￿48

AWG2021 User Manual