Teledyne T101 - page 27

3. GETTING STARTED

3.1. UNPACKING AND INITIAL SETUP

CAUTION

To avoid personal injury, always use two persons to lift and carry the Model T101.

Remove dust plugs prior to operating instrument. It is recommended that you store shipping

containers/materials, including shipping screws and dust plugs for the pneumatic ports, for future use

if/when the instrument should be returned to the factory for repair and/or calibration service. See

Warranty section in this manual and shipping procedures on our Website at

http://www.teledyne-api.com under Customer Support > Return Authorization.

1. Inspect the received packages for external shipping damage. If damaged,

please advise the shipper first, then Teledyne API.

2. Included with your analyzer is a printed record (Form number 04551) of

the final performance characterization performed on your instrument at

the factory. This record is an important quality assurance and calibration

record for this instrument. It should be placed in the quality records file

for this instrument.

3. Carefully remove the top cover of the analyzer and check for internal

shipping damage.

 Remove the set screw located in the top, center of the rear panel

 Remove the screws fastening the top cover to the unit (four per side).

 Lift the cover straight up.

CAUTION – Avoid Warranty Invalidation

Printed circuit assemblies (PCAs) are sensitive to electro-static discharges too small

to be felt by the human nervous system. Damage resulting from failure to use ESD

protection when working with electronic assemblies will void the instrument warranty.

See A Primer on Electro-Static Discharge in this manual for more information on preventing

ESD damage.

07266B DCN6485