Teledyne T101 - page 67

Teledyne API – T101 Operation Manual Operating Instructions

NOTE

If the analyzer beeps when you press the EXIT button, it means that you’ve made a

change/entered a new value for a parameter but have not caused it to be accepted by

pressing ENTR first.

4.4.1. SETUP – CFG: VIEWING THE ANALYZER’S

CONFIGURATION INFORMATION

Pressing the CFG button displays the instrument configuration information. This display

lists the analyzer model, serial number, firmware revision, software library revision, CPU

type and other information. Use this information to identify the software and hardware

when contacting Technical Support. Special instrument or software features or installed

options may also be listed here.

SAMPLE* RANGE = 500.0 PPB H2S =X.XXX

< TST TST > CAL SETUP

SAMPLE ENTER SETUP PASS : 818

8 1 8 ENTR EXIT

SAMPLE PRIMARY SETUP MENU

CFG DAS RNGE PASS CLK MORE E XIT

SAMPLE T101 SO2-H2S ANALYZER

NEXT PREV EXIT

Press EXIT

any time to

return to

SETUP menu

Press EXIT

any time to

return to the

SAMPLE dis

Press NEXT of PRE V to move back

and forth through the followin g list

of Configuration information:

 MODEL NAME

 SERIAL NUMBER

 SOFTWARE REVISION

 LIBRARY REVISION

 iCHIP SOFTWARE REV ISI O N1

 HESSEN PROTOCOL REVISION1

 ACTIVE SP EC IAL SOFTWARE

OPTIONS1

 CPU TYPE

 DATE FACTORY CONFIGURATION

SAVED

Only appe ars if r elevan t option of Featur e is act ive.

07266B DCN6485