Operating Instructions Teledyne API - Model T200H/T200M Operation Manual
114
4.11.7.2. Configuring Ethernet Communication Manually (Static IP Address)
1. Connect a cable from the analyzer’s Ethernet port to a Local Area Network (LAN) or
Internet port.
2. From the analyzer’s front panel touch screen, access the Ethernet Menu:
(SETUP>MORE>COMM>INET).
3. Follow the setup sequence as shown in Figure 4-7, and edit the Instrument and
Gateway IP addresses and the Subnet Mask to the desired settings.
4. From the computer, enter the same information through an application such as
HyperTerminal.
5. Table 4-13 shows the default Ethernet configuration settings.
07270B DCN6512