Teledyne T200H/M - page 143

Teledyne API - Model T200H/T200M Operation Manual Operating Instructions
141
The available gas concentration DAS parameters for output via the T200H/M analog
output channels are:
Table 4-23: Analog Output DAS Parameters Related to Gas Concentration Data
REPORTING
RANGE
PARAMETER
NAME1 DESCRIPTION
NXCNC1 Concentration
NXSLP1 Slope
NXOFS1 Offset
NOx Range 1
(LOW)
NXZSC1 Concentration during calibration, prior to computing new slope and offset
NXCNC2 Concentration
NXSLP2 Slope
NXOFS2 Offset
NOx RANGE 2
(HIGH)
NXZSC2 Concentration during calibration, prior to computing new slope and offset
NOCNC1 Concentration
NOSLP1 Slope
NOOFS1 Offset
NO Range 1
(LOW)
NOZSC1 Concentration during calibration, prior to computing new slope and offset
NOCNC2 Concentration
NOSLP2 Slope
NOOFS2 Offset
NO RANGE 2
(HIGH)
NOZSC2 Concentration during calibration, prior to computing new slope and offset
N2CNC1 Concentration - Computed with data from NOx Range 1 and NO Range 1
NO2 Range 12
(LOW) N2ZSC1 Concentration during calibration, prior to computing new slope and offset
N2CNC2 Concentration - Computed with data from NOx Range 2 and NO Range 2
NO2 RANGE 22
(HIGH) N2ZSC2 Concentration during calibration, prior to computing new slope and offset
O2CONC3 Concentration
O2OFST3 Slope
O2SLPE3 Offset
O2 Range3
O2ZSCN 3 Concentration during calibration, prior to computing new slope and offset
1 Parameters are not listed in the order they appear on the DAS list (see Table A-6 or Appendix A.5 for the proper order of the full list of
parameters)
2 Since NO2 values are computed rather than measured directly, no separate slope or offset exist.
3 Only available on instruments with O2 sensor options installed.
07270B DCN6512