Teledyne T200H/M

Teledyne API - Model T200H/T200M Operation Manual Operating Instructions

4.7.2.8. RS-232 Report Function

The T200H/M DAS can automatically report data to the communications ports, where

they can be captured with a terminal emulation program or simply viewed by the user.

To enable automatic COM port reporting, follow the instruction shown in section 4.7.2.2

then press:

Edit Data Channel Menu

SETUP X.X 0) CONC: ATIMER, 8, 800

PREV NEXT INS DEL EDIT PRNT EXIT

Exits to the main

Data Acquisition

SETUP X.X NAME:CONC

<SET SET> EDIT PRINT EXIT

SETUP X.X RS-232 REPORT: OFF

<SET SET> EDIT PRINT EXIT

ENTR acce pts the new

setting and returns to the

previous menu.

EXIT ignores the new setting

and returns to the previous

menu.

SETUP X. X RS-232 REPORT: OFF

OFF ENTR EXIT

Toggle bu tton to turn

reporting ON or OFF

Press SET> key until…

From the DATA ACQUISITION menu

(see Sectio n 6.7.2.2 )

4.7.2.9. Compact Report

When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead

of reporting each parameter in one channel on a separate line, up to five parameters are

reported in one line, instead. For example, channel DIAG would report its record in two

lines (10 parameters) instead of 10 lines. Individual lines carry the same time stamp and

are labeled in sequence.

4.7.2.10. Starting Date

This option allows to specify a starting date for any given channel in case the user wants

to start data acquisition only after a certain time and date. If the Starting Date is in the

past, the DAS ignores this setting.

07270B DCN6512