Operating Instructions Teledyne API - Model T200H/T200M Operation Manual
96
4.7.3. REMOTE DAS CONFIGURATION
Editing channels, parameters and triggering events as described in 6.7 is much more
conveniently done in one step through the APICOM remote control program using the
graphical interface shown in Figure 4-4. Refer to Section 4.15 for details on remote
access to the T200H/M analyzer.
Figure 4-4: APICOM Graphical User Interface for Configuring the DAS
Once a DAS configuration is edited (which can be done offline and without interrupting
DAS data collection), it is conveniently uploaded to the instrument and can be stored on
a computer for later review, alteration or documentation and archival. Refer to the
APICOM manual for details on these procedures. The APICOM user manual is
included in the APICOM installation file, which can be downloaded at
http://www.teledyne-api.com/software/apicom/.
Note Whereas the editing, adding and deleting of DAS channels and
parameters of one channel through the front-panel touch screen can be
done without affecting the other channels, uploading a DAS configuration
script to the analyzer through its communication ports will erase all data,
parameters and channels by replacing them with the new DAS
configuration. It is advised to download and backup all data and the
original DAS configuration before attempting any DAS changes.
07270B DCN6512