Using Disk Drives
2-25

Restore the Remaining Files

Restore the remaining program and data files
following the procedures for the backup
software.

Check the New Hard Disk Drive

After restoring all the files, run ScanDisk and
Defrag to check the condition of the hard disk
drive.
Connecting an External FloppyDisk Drive
Models with CD-ROM drives have external floppy
disk drives. To connect the external floppy disk
drive to your computer, follow these steps.
1. Plug the 25-pin end of the floppy disk drive
cable into the parallel port on the rear panel
of the computer.
2. Attach the other end of cable to the floppy
disk drive.