120 Chapter 6: Basic Function Graphing
06BASFUN.DOC TI-89/TI-92 Plus: Basic Function Graphing (English) Susan Gullord Revised: 02/23/01 4:09 PM Printed: 02/23/01 4:18 PM Page 120 of 22
1. From the
„ Zoom menu, select 1:ZoomBox.
The screen prompts for 1st Corner?
2. Move the cursor to any corner of the box you want to define, and
then press ¸.
The cursor changes to a small
square, and the screen
prompts for 2nd Corner?
3. Move the cursor to the
opposite corner of the zoom
box.
As you move the cursor, the
box stretches.
4. When you have outlined the
area you want to zoom in on,
press ¸.
The Graph screen shows the
zoomed area.
1. From the „ Zoom menu,
select 2:ZoomIn or 3:ZoomOut.
A cursor appears, and the
screen prompts for New
Center?
2. Move the cursor to the point
where you want to zoom in or
out, and then press ¸.
The TI-89 / TI-92 Plus adjusts
the Window variables by the
Zoom factors defined in
SetFactors.
¦ For a ZoomIn, the x variables are divided by xFact, and the
y variables are divided by yFact.
new xmin = xmin
xFact , etc.
¦ For a ZoomOut, the x variables are multiplied by xFact, and the
y variables are multiplied by yFact.
new xmin = xmin ùxFact , etc.
Zooming In with a
Zoom Box
Tip: To move the cursor in
larger increments, use
2B
,
2D
, etc.
Tip: You can cancel
ZoomBox by pressing
N
before you press
¸
.
Zooming In and Out
on a Point
y1(x)=2øsin(x)