Chapter 14: Split Screens 235
14SPLIT.DOC TI-89/TI-92 Plus:Split Screens (English) Susan Gullord Revised: 02/23/01 1:09 PM Printed: 02/23/01 2:16 PM Page 235 of 6
¦ The active application is indicated by a thick border.
¦ The toolbar and status line, which are always the full width of the
display, are associated with the active application.
¦ For applications that have an entry line (such as the Home screen
and Y= Editor), the entry line is the full width of the display only
when that application is active.
Press 2a
(second function of O) to switch from one
application to the other.
Method 1: 1. Use 2a
to switch to the application you want to
replace.
2. Use
O or ¥ (such as ¹ $) to select the
new application.
If you select an application that is already displayed, the
TI-89 / TI-92 Plus switches to that application.
Method 2: 1. Press 3 and then „.
2. Change
Split 1 App and/or Split 2 App.
If you set Split 1 App and Split 2 App to the same
application, the TI-89 / TI-92 Plus exits the split screen
mode and displays the application full screen.
Selecting the Active Application
With a split screen, only one of the two applications can be
active at a time. You can easily switch between existing
applications, or you can open a different application.
The Active
Application
Switching between
Applications
Opening a Different
Application
Note: Also refer to “Using
2 K
to Display the
Home Screen” on page 236.
Note: In two-graph mode,
described in Chapter 12, the
same application can be in
both parts of a split screen.
Toolbar is for Y= Editor.
Toolbar is for Graph
screen.
Thick border indicates
the Y= Editor is active.
Thick border indicates the
Graph screen is active.
Entry line is full width when
Y= Editor is active.
Graph screen does not
have an entry line.