Chapter 17: Programming 305
17PROGRM.DOC TI-89/TI-92 Plus: Programming (English) Susan Gullord Revised: 02/23/01 1:14 PM Printed: 02/23/01 2:18 PM Page 305 of 40
Command Description
DispTbl Displays the current contents of the Table screen.
setTable Sets the Graph <–> Table or Independent table
parameters. (To set the other two table parameters,
you can store the applicable values to the tblStart
and @tbl system variables.)
Table Builds and displays a table based on one or more
expressions or functions.
Command Description
ClrGraph Erases any functions or expressions that were
graphed with the Graph command.
Define Creates a user-defined function.
DispG Displays the current contents of the Graph screen.
FnOff Deselects all (or only specified) Y= functions.
FnOn Selects all (or only specified) Y= functions.
Graph Graphs one or more specified expressions, using the
current graphing mode.
Input Displays the Graph screen and lets the user update
the variables xc and yc (rc and qc in polar mode) by
positioning the graph cursor.
NewPlot Creates a new stat plot definition.
PlotsOff Deselects all (or only specified) stat data plots.
PlotsOn Selects all (or only specified) stat data plots.
setGraph Changes settings for the various graph formats
(Coordinates, Graph Order, etc.).
setMode Sets the Graph mode, as well as other modes.
Style Sets the display style for a function.
Trace Lets a program trace a graph.
ZoomBox
– to –
ZoomTrig
Perform all of the Zoom operations that are available
from the „ toolbar menu on the Y= Editor, Window
Editor, and Graph screen.
Creating a Table or Graph
To create a table or a graph based on one or more functions or
equations, use the commands listed in this section.
Table Commands
Graphing
Commands
Note: For more information
about using
setMode
, refer
to page 300.