358 Chapter 21: Memory and Variable Management
21MEMORY.DOC TI-89/TI-92 Plus:Memory & Variables Mgmt (English) Susan Gullord Revised: 02/23/01 1:20 PM Printed: 02/23/01 2:19 PM Page 358 of 16
For information about using folders, refer to Chapter 5.
1. On VAR-LINK, press ƒManage and select 5:Create Folder.
2. Type a unique name, and
press ¸ twice.
You must have at least one folder other than MAIN. You cannot use
VAR-LINK to copy variables within the same folder.
1. On VAR-LINK, select the variables.
2. Press ƒManage and select 2:Copy or 4:Move.
3. Select the destination folder.
4. Press ¸.
The copied or moved
variables retain their
original names.
Remember, if you use †to select a folder, the variables in that
folder are selected automatically. As necessary, use †to deselect
individual variables.
1. On VAR-LINK, select the variables and/or folders.
2. Press ƒManage and select 3:Rename.
3. Type a unique name, and
press ¸ twice.
If you selected multiple items,
you are prompted to enter a
new name for each one.
When a variable is locked, you cannot delete, rename, or store to it.
However, you can copy, move, or display its contents. When a folder
is locked, you can manipulate the variables in the folder (assuming
the variables are not locked), but you cannot delete the folder. When
a Flash application is locked, you cannot delete it.
1. On VAR-LINK, select the variables and/or folders, or Flash
application.
2. Press ƒManage and select 6:Lock or 7:UnLock.
Creating a New
Folder
Copying or Moving
Variables from One
Folder to Another
Tip: To copy a variable to a
different name in the same
folder, use
§
(such as
a1!a2)
or the
CopyVar
command from the Home
screen.
Renaming Variables
or Folders
Locking or
Unlocking Variables
Folders, or Flash
Applications
Πindicates a locked variable,
folder, or Flash application in
RAM
û indicates an archived variable,
which is locked automatically.