INSTALLING YOUR OVEN ACCESSORIES
INSTALLING YOUR OVEN ACCESSORIES
2. Side racks
• Insert the twin pegged side into the rear access holes provided, ensuring pegs are fully inserted.
• Then locate the front peg into the front access hole and push in firmly.
1. Catalytic liners (on selected models)
Catalytic liners are coated with a specially formulated enamel coating. This porous coating enables the “self cleaning” process – see page 26 for more details. Catalytic liners must be installed first but you can omit them, if you wish, with no effect to cooking performance. Their sole purpose is to make oven cleaning easier.
• The catalytic liners will attach to each side of your oven. There will be a left hand and right hand version. This is marked on the panel.
• Position the first liner as per the diagram. The black, shiny side of the liner should be facing the oven wall, the hooks pointing down and the word ‘LH’ positioned to the top rear portion of the oven. The right hand side will be a mirror image of this.
• Line the hooks up with the slots provided in the oven wall, push them in and then allow the liner to slide down to its final position.
•The access hole for the side racks should be visible when the liner is correctly positioned – see diagram.
•When locating the side racks into the small oven or grill ensure the left pegs go into the upper two access holes.
3. Shelves and trays (excluding POR881)
The shelves are designed so that they have maximum travel but cannot be accidentally pulled right out. The trays are designed the same way and fit straight into the side racks.
•Locate the rear edge of the shelf/tray in between
2 guide rails of the side rack – see diagram. Ensure the same rail positions on both sides of the oven are being engaged.
•With the front edge raised, begin to slide the shelf into the oven.
•Once the detents have passed the front edge of the side rack, the shelf can be pushed completely in.
•When fully inserted the shelf/tray should not interfere with the closed oven door.
•To insert the grill tray in a separate grill underbench product, fully open the drawer and position the tray so that the slots on the outer edges fit over the tabs on the slides.
•Remove extra trays and dishes before roasting or baking.
Shelves and trays (POR881 only)
Your oven comes with formed “easy clean” runners.
The shelves are designed to travel freely on runners without being pulled out accidentally. Make sure you have the shelf in the correct orientation before you slide it in. Otherwise it could become jammed.
•Locate the rear edge of the shelf in the recess between 2 formed runner.
Note: The Top ‘Ledge’ is not a shelf position
•With the front edge raised, begin to slide the shelf into the oven. Lower the front edge as you push the shelf completely in.
•The grill/baking tray for underbench oven models sits into a wire carrier that fits into the oven exactly like the shelves.
•The grill/baking tray for separate grill wall oven models slides into the wire runners in a similar manner.
•When fully inserted, the shelf/tray should not interfere with the closed oven door.
INSTALLATION | 8 | 9 | INSTALLATION |
|
|
|
|
