ASSEMBLING THE FABRIC STEAMER
9
Top Innovations, Inc.
ATTACHING THE STEAMHOSE
1. Place end of Steam Hose onto threaded Hose Base (FIGURE 7).
2. Rotate knob in clockwise direction until Steam Hose is tightly secured onto Hose
Base (FIGURE 8). Hand tighten only. Do not over-tighten.
3. Hang Steam Nozzle on specially designed Steam Nozzle Holder (FIGURE9).
FIGURE7 FIGURE 8
CAUTION: To prevent steam from causing bodily injury ordamage to
surfaces, always hang the Steam Nozzle on the Steam Nozzle Holder when not
in use.
Do not lay the Steam Hose on the floor as condensation may occur, causing
unwanted water droplets in the steam.
Do not pull on the Steam Hose with excessive force as this may damage it,
resulting in a steam leak.
Your new SF-407 Fabric Steamer is now fully assembled and ready for use. Please
continue reading this manual for instructions on using the Fabric Steamer, as well as
directions for cleaning and storage.
FIGURE9