INSTALLATION (Connection)
2) Installing the PVR with one Antenna.
The Connection Type in LNB setting menu should be set to Loop Through.
Tuner 1 and 2 can receive the RF signal of the same polarity and the same band.
3) Installing the PVR with Twin LNB Antenna. The Connection Type in LNB setting menu should be set to Separated.
4)Installing the PVR with two separated Twin LNB Antennas and DiSEqC switches.
The Connection Type in LNB setting menu should be set to Separated.
Connection to the other Satellite Receiver.
Connect the satellite antenna cable to the LNB IN socket on the PVR. With other connector, connect the IF OUT socket on the PVR and the LNB IN socket of the other PVR or STB.
* Remarks
LNB power will not be bypassed from IF OUT to LNB IN. Only IF signal will be bypassed to IF OUT from LNB IN.
15