7.3From another digital receiver via RS-232 port 39
7.3 From another digital receiver via RS-232 port
Itis possible to transfer the firmware from the digital receiver
toanother same digital receiver by connecting them with a RS-
232cable. Toupdate the firmware with this method, perform
thefollowing steps:
1. Turn off the target digital receiver.
2.
Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
thematching port on the other digital re-
ceiver.
3.
Turnon the source digital receiver if not
alreadyon.
4.
Selectthe Installation
>
TransferFirmware
toOther IRD menu, thenyou get asked for
confirmation;select Yes.
5.
Turnon the target digital receiver to start
thefirmware transfer.
6.
A progress bar appears showing the
progressof the firmware transfer.
7.
Restartthe target digital receiver when the
firmwaretransfer is complete.