18 PreferenceSettings
connector. Through this socket, the digital receiver is able to
outputvideo signals of various color models: CVBS,S-Video,
YUVand RGB. Audio signals are also output together through
thissocket.
If you have connected the digital receiver and your televsion
by this connector,you should set the Video Outputoption to
yourdesired color model. If you have connected them by RCA
connectorat which VIDEO reads on the back panel of the dig-
ital receiver, you do not have to set this option because the
digital receiver outputs CVBS video through RCA connector
independentof SCART connector.
However, If you have connected them by S-VIDEO connec-
tor,you have to set this option to S-Video because the output
through S-Videoconnector comes from the SCART interface.
Similarly,if you have done by YUV connectors (Y,Pb and Pr),
youhave to set this option to YUV because of the same reason.
It is known in general that YUV color model provides the
bestvideo quality with little difference from RGB color model
while CVBS color model does the least. Anyway, not all tele-
visionswith a SCART socket support YUV color model. Make
sureyour television supports YUV color model before setting
the Video Output option to YUV. But there would rarely be
television sets that have a SCART socket but do not support
RGBcolor model. SoRGBwould be the most desirable value
forthis option.
3.2.3 Video cassette recorder
The SCART socket that reads VCR on the back panel of the
digital receiver is for a video recorder. You would have con-
nected the digital receiver to your video recorderor such an
applianceby this connector.
If you have connected the VCR socket to the input SCART
socket of your video recorder,you have to set the VCR Scart
Typeoption to Standard. Ifyou have connected it to the out-