Toro N-DR2000 8. CONNECTIONS, 9. NETWORK VIDEO RECORDER ACTIVATION AND TERMINATION

8
Software Decoder
N-SD2000
Network
Combination Dome Camera
N-CC2564
Network
Color Camera
N-CC2360
Network Video Receiver
N-VR2010 Monitor
Network
Video Transmitter
Network
Video Transmitter
N-VT2010
HDD
DEO
NETWORK
VI
ERROR
N-
RECORDER
POWER
DR2000
Network Video Recorder
N-DR2000
PoE compatible
switching HUB
Analog
CCTV system
To AC Main
To AC Main
To 24V AC
To 24V AC
12345678 DC-IN
Combination Dome Camera
: Coaxial cable
: 10BASE-T/100BASE-TX
: 100BASE-TX/1000BASE-T
N-VT2010
TM
RS-485
8. CONNECTIONS
[ Connection example ]
9. NETWORK VIDEO RECORDER ACTIVATION AND TERMINATION
9.1. Recorder's Activation
1. Connect each component correctly.
2. Press the power switch.
The system activates approximately 1 minute after the power has been switched on. The power
automatically switches on with the power cord is connected.
9.2. Recorder's Termination
Press the power switch.
The system terminates approximately 30 second after the power has been switched off.
Note
It is possible to turn the device off even in the middle of a Normal Recording operation.
Even if the system is then restarted, the recording will continue after the restart.