172 Exploring Your Options
Using PC Cards
5.375 x 8.375 ver 2.1.2
Inserting PC Cards
Inserting a PC Card
1If your PC Card does not support hot swapping, save
your data and turn off the computer before inserting the
PC Card. For more information, see “Hot swapping” on
page 174.
2Hold the PC Card with the arrow or main label side up
and the connector side toward the slot.
3Align the card connectors with an available PC Card slot
and carefully slide the card into the slot until it locks into
place.
NOTE: If you have a Type III card, insert the connector into the
lower slot. If you have a Type II card, you can insert it into either
the upper or the lower slot.
There are two eject buttons, one per slot.
CAUTION: To avoid damaging the PC Card or the computer, do not
force the card into the PC Card slot.