TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting.
TO ADD/DELETE CHANNELS
1Press MENU.
2Press SET + or – until the indicator next to “CH SETUP” begins to flash, then press
ENTER.
MENU
CH SETUP
PICTURE
LANGUAGE
LOCK
ON TIMER
〈 + /
TV/CABLE SELECTION
1Press MENU.
2Press SET + or – until the indicator next to “CH SETUP” begins to flash, then press
ENTER.
3 Press SET + or – until the indicator next |
to “TV/CABLE” begins to flash. |
MENU
CH SETUP
PICTURE
LANGUAGE
LOCK
ON TIMER
〈 + /
3Press SET + or – until the indicator next to “ADD/DELETE” begins to flash, then press ENTER.
4Select the desired channels to be added or deleted using the Direct Channel Selection buttons
TV CABLE
AUTO CH MEMORY
ADD / DELETE
〈+ /
4Press ENTER to select the TV or CABLE mode. The arrow indicates the selected mode.
5Press MENU repeatedly until the MENU screen is cleared.
TV CABLE AUTO CH MEMORY ADD / DELETE
〈+ /
5 Press ENTER to select ADD or DELETE. |
If an unmemorized channel was selected (step 4), the |
channel indication will be red. Press ENTER if you wish |
to ADD the unmemorized channel. The channel indica- |
tor will change from red to green when a channel is |
added and the channel will be memorized. |
NOTE:
Contact your cable company to determine the type of cable system used in your area.
If a memorized channel was selected (step 4), the chan- |
nel indication will be green. To delete the channel from |
memory, press ENTER repeatedly until
AUTOMATIC CHANNEL MEMORY
1Press MENU.
2Press SET + or – until the indicator next to “CH SETUP” begins to flash, then press
ENTER.
3Press SET + or – until the indicator next to “AUTO CH MEMORY” begins to flash, then press ENTER. The TV will begin memorizing all the channels available in your area. Channel numbers will remain red until auto memorizing is complete.
MENU
CH SETUP
PICTURE
LANGUAGE
LOCK
ON TIMER
〈 + /
TV CABLE
AUTO CH MEMORY
ADD / DELETE
〈+ /
“DEL” appears
when a channel is deleted. Repeat Steps 4 and 5 for each channel to be added or deleted.
6Press MENU repeatedly until the MENU screen is cleared.
4Press MENU repeatedly until the MENU screen is cleared.
ADJUSTING THE PICTURE
You can adjust the settings for color, sharpness, contrast, brightness and tint.
1 Press MENU. | 4 Press SET + or – to adjust the setting. |
2Press SET + or – until the indicator next to “PICTURE” begins to flash, then press ENTER.
3Press ENTER repeatedly to select the item you want to adjust.
BRIGHTNESS CONTRAST COLOR TINT SHARPNESS
| + | – |
BRIGHTNESS | higher | lower |
|
|
|
CONTRAST | lighter | darker |
|
|
|
COLOR | deeper | paler |
|
|
|
TINT | greenish | reddish |
|
|
|
SHARPNESS | sharper | softer |
|
|
|
TO RETURN TO INITIAL SETTING:
Press RESET while the picture adjusting mode appears
10