Programming the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 14.

Using the Remote Control

RECALL

POWER

}Channel

Numbers

Device Switch

Note:

1 In the remote control code table (below and on the next page), find the code for your device. If more than one code is listed, try each one separately until you find one that works.

2 Set the Device Switch to the type of device you are programming the remote control to operate—CBL/SAT(for a cable converter box or satellite receiver), VCR (for a VCR or TV/VCR combo), or DVD (for a DVD player or HTIB [home theater in a box]).

3 While holding down RECALL, press the Channel Number buttons to enter the 3-digit code for your device.

4 To test the code, turn on the device, point the remote control at it, and press POWER.

–If the correct code was entered, the device will turn off.

–If the device does not respond, repeat steps 1–4 using another code.

–If the device does not respond to another code, you will need to use the remote control that came with the device.

Note: In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device’s original remote control.

5 Remember to set the Device Switch back to “TV” to control the TV.

6 For future reference, write down the code(s) you used:

DEVICE

CODE

DEVICE

CODE

 

 

 

 

 

 

 

 

Each time you change the batteries, you will need to reprogram the remote control.

Some newer VCRs respond to either of two codes. These VCRs have a switch labeled “VCR1/ VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control.

Remote control codes

In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, you will need to use the remote control provided with the device.

Cable converter box

 

General Instruments: 062,

Philips: 066, 067, 068,

Sears: 095

 

Universal: 065, 092, 097,

 

089, 096

070, 072, 073, 074,

Signature: 062

 

099, 102, 103

ABC: 061, 062, 063, 082,

 

 

 

Hamlin: 093

075, 091, 092

Signature 2000: 096

 

Wards: 096

084, 087, 091, 092,

 

 

 

Hitachi: 062, 095, 096

Pioneer: 076, 077

Sprucer: 081, 085

 

 

096, 098

 

Jasco: 097

Proscan: 061, 062

Starcom: 069, 082, 087,

 

Satellite receiver

Archer: 065, 092, 097, 099

 

Jerrold: 062, 069, 071,

Radio Shack: 092, 097,

096, 103, 104

 

Alphastar: 038, 059

Cableview: 064, 094

 

 

 

082, 086, 089, 091,

099

Stargate: 069, 090

 

 

 

Chaparral: 034

Century: 092

 

 

 

096

RCA: 064, 081

Sylvania: 095, 100

 

 

 

DISH Network: 057

Citizen: 090, 092, 097

 

 

 

Magnavox: 072, 096

Realistic: 065

TeleView: 090

 

 

 

Drake: 020, 040, 044, 046,

Contec: 083, 085, 086,

 

 

 

Memorex: 091, 092, 104

Recoton: 102

Texscan: 100

 

 

 

050, 053

088, 093, 098

 

 

 

Multi Canal: 090

Samsung: 077, 090

Tocom: 071, 084, 085

 

 

 

Echostar: 018, 041, 051

Diamond: 093

 

 

 

Novavision: 101

Scientific Atlanta: 063,

U. S. Electronics: 087,

 

 

 

Express Vu: 057

Eagle: 091

 

 

 

Panasonic: 081, 083, 085

078, 079, 080, 088,

096, 098

 

 

 

Fujitsu: 027

GE: 061, 062

 

 

 

Philco: 087

098, 101, 105

United Cable: 082

 

 

 

GE: 008, 009, 013

Gemini: 069, 070, 094

 

 

 

 

 

 

 

 

 

 

 

 

 

12