15

ADDITIONAL FEATURES

AV connections and input selection

Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.

Again, from the Feature menu select AV
connection.
Using the Sor Rbuttons change the EXT2
output option to:
MONITOR = The picture on screen
TV = The last television programme selection.
EXT 1 = The picture from equipment connected
to Scart 1.
EXT 3 = The picture from equipment connected
to Scart 3 or the side input sockets.
2
1

Selecting the OUTPUT signal for Scart 2

Selecting the INPUT signal

This feature allows you to specify the type of signal going
into Scarts 2 (EXT 2) or 3 (EXT 3) on the back of the
television and the sockets on the side (which are also
EXT 3). Please refer to the manufacturers instructions for
the connected equipment.
1
From the Feature menu select AV connection and
with the Sor
R
button select either AV or S-VIDEO
as the required input for EXT2 and EXT3.
If the colour is missing try the alternative setting.

This feature enables you to select the source to output

from Scart 2. e.g. If you connect a stereo decoder to

Scart 1 and a stereo video recorder to Scart 2, and

select EXT 1 as the EXT2 output (i.e. you will output

the signal received through Scart 1 directly out to

Scart 2), you will be able to record the stereo decoder

transmission in stereo.

Most video recorders and decoders send a signal
through the Scart lead to switch the TV to the correct
Input socket. Alternatively press the external source
selection button Brepeatedly until you see the picture
from your equipment. You must use this button to view
equipment connected using the COMPONENT VIDEO
INPUT (EXT 4).
An S e.g. EXT2S, indicates the input is set for an
S-Video signal.
…Please see page 20
for a clear view of the
back connection
recommendations…
Press the Bbutton to bring up EXT 1 on the
screen. This will display the signal coming in
through Scart 1.
Press the Bbutton again to select the equipment
connected to Scart 2 (EXT 2).
And press the Bbutton again for EXT 3
(Scart 3, I,on the back of the TV or J,
on the side of the TV) and again for EXT 4
(Component Video Input).
To return toTV mode simply press one of the
numbered buttons on the remote control.
To view the external equipment once again,
simply press the Bbutton until you see your
external source.

Input Selection

Using the Input Selection if the TV does not switch over
automatically.
1
2
3
4

AVconnection

Back
EXT2 input AV
EXT3 input S-VIDEO
EXT2 output EXT 1

AVconnection

Back
EXT2 input AV
EXT3 input S-VIDEO
EXT2 output EXT 1