Toshiba 4511, 3511 - page 23

November 2003 © TOSHIBA TEC 2 - 3 e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
E420
E430
E440
E450
E480
E510
E520
E550
E711
E712
E713
E714
E721
E722
E723
E724
E725
E726
Cover open jam
Paper transport
jam (ADU section)
Other paper jam
RADF jam
PFP side cover open jam: The PFP side cover has opened
during printing.
ADU open jam: The ADU has opened during printing.
Side cover open jam: The side cover has opened during
printing.
LCF side cover open jam: The LCF side cover has opened
during printing.
Bridge unit open jam: The bridge unit has opened during
printing.
Stop jam in the ADU: The paper does not reach the ADU exit
sensor after it has passed the ADU entrance sensor.
Jam not reaching the ADU entrance sensor: The paper does
not reach the ADU entrance sensor after it is switchbacked in
the exit section.
Paper remaining jam on the transport path: The paper is
remaining on the transport path when printing is finished
(caused by a multiple paper feeding).
Jam not reaching the original length sensor: The original fed
from the original feeding tray does not reach the original length
sensor.
Jam not reaching the registration sensor: The original fed from
the original feeding tray does not reach the registration sensor.
Stop jam at the original length sensor: The trailing edge of the
original does not pass the original length sensor after its leading
edge has reached this sensor.
Feed signal reception jam: The feed signal is received even no
original exists on the original feeding tray.
Jam not reaching the read sensor: The original does not reach
the read sensor after it has passed the registration sensor
(when scanning obverse side) or the reverse sensor (when
scanning reverse side).
Jam not reaching the exit sensor (during scanning): The original
which passed the read sensor does not reach the exit sensor
when it is transported from the scanning section to exit section.
Jam not reaching the reverse sensor (during scanning): The
original which passed the read sensor does not reach the
reverse sensor when it is transported from the scanning section
to reverse section.
Stop jam at the registration sensor: The trailing edge of the
original does not pass the registration sensor after its leading
edge has reached this sensor.
Stop jam at the read sensor: The trailing edge of the original
does not pass the read sensor after its leading edge has
reached this sensor.
Transport/exit signal reception jam: RADF receives the transport/
exit reception signal from the equipment when no original is at the
exposure waiting position.
Ch. 5.1.5
Ch. 5.1.5
Ch. 5.1.5
Ch. 5.1.5
Ch. 5.1.5
Ch. 5.1.3
Ch. 5.1.3
Ch. 5.1.4
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Ch. 5.1.6
Trouble-
shooting
Error code Classification Contents