Toshiba 4511, 3511

e-STUDIO3511/4511 PREVENTIVE MAINTENANCE 4 - 2 November 2003 © TOSHIBA TEC

(2) Operational screen

(a) Main screen

Fig. 4-102

Displaying of the main unit name

Back to the PM support mode activation screen

Clearing of the chosen unit counters (all the sub unit (parts) counters belonging to that unit)

All counters are cleared when the unit is not selected

Moving to the sub screen

Moving to the next/previous page

Displaying of the standard number of output pages / develop counts (x1,000) to replace the

unit parts

Displaying of the present drive counts (x1,000)

“∗” is displayed next to the present number when the number of drive counts has exceeded

its PM standard number.

Displaying of the standard number of drive counts (x1,000) to replace the unit parts

Displaying of the present number of output pages/develop counts (x1,000)

When there are differences among the sub units (parts), “_” is displayed and “CHECK

SUBUNIT” is displayed at the top

“∗” is displayed next to the present number when the number of output pages or develop

counts has exceeded its PM standard number.

Displaying of the number of output pages / develop counts (Page/D. cnt), drive counts (Cnt.)

and previous replacement date (Chg.) for a chosen unit

When the replacement date for the sub unit is different, press the [SUB UNIT] button to

move to the sub screen and see each information, otherwise information is not displayed

Notes:

1. “—” is always displayed at the drive counts section for the reversing automatic document

feeder (RADF) and feed unit.

2. “—” is displayed at the numeric section for the paper source which is not installed since the

paper source is different depending on the structure of options.

234 5 6

910