Toshiba 36A13 Connecting your TV, Connecting a satellite receiver and a VCR, Connecting a cable converter box and a VCR

Connecting your TV

Connecting a cable converter box and a VCR

With this connection you can:
•	watch videotapes
•	watch and record basic and premium cable channels
•	record one channel while watching the same or another
	basic channel									From
Tune the VCR to channel								Cable
		Stereo VCR					OUT			Cable
3 or 4 (whichever channel is vacant								Converter
							IN	Box
in your area), place the TV in		S-VIDEO VIDEO	L R
			AUDIO
VIDEO 1 mode, and then use the			IN	IN from ANT OUT to TV			OUT		Cable
converter box to change channels.			OUT			CH3	OUT		Signal	IN
									Splitter
You will need:						CH4
				TV
•	one cable signal splitter
				IN			OUT
•	four coaxial cables
				VIDEO	VIDEO	STREAM	VIDEO
						COLOR
						INPUT
•	one set of standard A/V cables			L/	Y		L/
					L
				MONO			MONO
Note:							ANT
				AUDIO	AUDIO PB		AUDIO
If you have a mono VCR, connect TV L/Mono Audio IN				R	R	PR	R
to VCR Audio OUT using only one audio cable.				VIDEO-1	VIDEO-2

When you use a converter box with your TV, you

may not be able to use the remote control to program certain features (for example, blocking channels).

For better quality, if your VCR has S-video, you can use an

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials

S-video cable (plus the standard audio cables) instead of the

standard video cable. Do not connect a standard video cable

is prohibited under the Copyright Laws of the United States

and an S-video cable to VIDEO-1 at the same time or the

and other countries, and may subject you to civil and

picture performance will be unacceptable.

criminal liability.

Connecting a satellite receiver and a VCR

With this connection you can:

•	watch videotapes	From Satellite dish
• watch satellite and TV channels		Satellite Receiver
•	record one TV channel while watching
	the same or another channel	S-VIDEO VIDEO	AUDIO	Satellite IN
You will need:		OUT	L R
				OUT
•	three coaxial cables

• two sets of standard A/V cables

Note:

To watch satellite programs, the TV must select VIDEO-1 (see page 16).

To watch VCR programs, the TV must select VIDEO-2 (see page 16).

For better picture quality, if your device has S-video, you can use an S-video cable (plus the standard audio cables) instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO-1 at the same time or the picture performance will be unacceptable.

TV

IN			OUT
		COLOR	ANT
VIDEO	VIDEO STREAM		VIDEO
		INPUT
L/			L/
MONO			MONO
AUDIO		PB	AUDIO
		PR	R
-1	VIDEO

Stereo VCR

S-VIDEO AUDIO

OUT	IN from ANT OUT to TV
	CH3
IN	CH4

From antenna

8