Chapter 7: Using the TV’s advanced features

61

Using MPEG noise reduction

The MPEG noise reduction feature allows you
to reduce visible interference caused by MPEG
compression. Choices for MPEG noise reduction
are Off, Low, Middle, and High. Off is automatically
selected when this feature is disabled (“grayed out”).
To select the MPEG noise reduction level:
1無 Press and open the Picture menu.
2無 Highlight Noise Reduction and press .
3無 Press p or q to highlight the MPEG Noise
Reduction field, and then press t or u to select
either Off, Low, Middle or High.
4無 To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .

Using the Game Mode feature

You can use the Game Mode feature for shorter
frame delays when playing a video game requiring
split-second timing between the on-screen display
and input from the controller (such as music creation
and high-action games).
This feature is more effective for 480i and 1080i input
signals.
Note: To use the Game Mode feature, the
current video input must be Video 1, Video 2,
ColorStream HD, HDMI 1, HDMI 2, HDMI 3 or
HDMI 4. The Game Mode cannot be turned on
when any other video input is selected.
To turn on Game Mode:
1無 Press and open the Picture menu, highlight
the Game Mode.
2無 Press t or u to select On.
To turn off Game Mode:
Select Off in step 2 above, change the video input, or
turn the TV off and then on again.
Note: You can change the video input by
pressing on the remote control ( page
35).
Using the advanced audio settings features

Using the QSound® sound feature

QSound® is the original name for a positional three-
dimensional (3D) sound processing algorithm from
QSound Labs that creates 3D audio effects from
multiple monophonic sources and sums the outputs
to two channels for presentation over regular stereo
speakers.
To adjust the QSound® settings:
1無 Put the TV in STEREO mode ( “Selecting
stereo/SAP broadcasts” on page 45).
2無 Press and open the Sound menu.
3無 Highlight Advanced Audio Settings and press .
4無 Press q or p to highlight the QSound feature,
and then press t or u to turn the QSound effect
On or Off.
5無 To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .
Note: If the broadcast is monaural, the
QSound effect will not work.