Connecting your TV

If you have not connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)

A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.

Audio and video cables are usually color-coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo (or mono) left channel. On the rear panel of the TV, the terminals are color-coded in the same manner as the cables.

S-video cables provide better picture performance. S-video cables can only be used with S-video compatible components.

ColorStream® (component video) cables come in sets of three and provide the best picture performance. ColorStream cables can only be used with ColorStream–compatible components.

ANTENNA

Coaxial Cable

AUDIO

Cables

VIDEO

Cable

S-VIDEO

Cable

Color Stream

Cable

Caution:

Do not plug the TV in until you have finished connecting all equipment.

Introduction

 

 

 

 

 

Connecting

yourTV

 

 

Usingthe

RemoteControl

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

one coaxial cable

one pair of audio cables (one single audio cable for a mono VCR)

one video cable (one S-video cable for an S-VHS VCR)

From Cable Box or Antenna

Stereo VCR

VIDEO

AUDIO

 

 

L

R

 

 

 

IN

OUT to TV IN from ANT

 

 

 

 

 

OUT

CH 3

 

 

CH 4

 

 

 

TV

AUDIO CENTER

CHANNEL IN

ANT( 75)

 

 

 

 

 

 

 

ANT-1

 

 

 

 

 

ON

 

OFF

 

 

 

 

OUT

 

 

OUT

S-VIDEO

 

R

L

VAR

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

VIDEO

Y

 

 

VIDEO

Y

 

ANT-2

 

 

 

 

 

L/

 

L

 

L/

 

 

L

PB

 

MONO

PB

MONO

 

 

 

 

 

 

 

 

 

 

 

AUDIO

PR

 

 

 

PR

AUDIO

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

R

 

R

 

 

R

COLOR

 

 

 

 

COLOR

 

 

VIDEO-1 VIDEO-2 STREAM

 

AUDIO

AUDIO

STREAM

 

 

HD 1

IN

 

OUT

HD 2

IN

IN

 

 

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable (in the S-video jacks) instead of the regular video cable.

Do not connect a regular video cable and an S-video cable to Video-1 (or Video-2) at the same time.

Settingup

yourTV

 

 

 

 

UsingtheTV’s

Features

 

 

 

 

Appendix

 

 

 

 

 

Index

 

 

 

5