Using the Remote Control

Verifying the device code (990)

Use this feature to verify the codes for your other devices. The number of blinks after pressing the 1, 2, 3, and 4 buttons is the 4- digit code set up for that mode.

For example, to verify the device code of the VCR:

1.Press MODE to select the VCR mode.

2.While holding down the RECALL button, press 9 –9 –0.

3.Press 1 0 blinks.

4.Press 2 3 blinks.

5.Press 3 8 blinks.

6.Press 4 5 blinks.

This verifies that the device code of the VCR mode is “0385.”

Using the volume lock feature (993)

For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls (VOL yz and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIO1/2 modes.

For example, to lock the volume controls to always jump to the CABLE/SAT mode:

1.Repeatedly press MODE to select the CABLE/SAT mode.

2.While holding down the RECALL button, press 9 –9 –3.

3.Press VOL y.

The Mode indicator will blink two times (locked).

The following table describes in more detail the Volume Lock implementation.

Volume

TV

CBL/SAT

VCR

DVD

AUD1

AUD2

Locked to

 

 

 

 

 

 

TV (default)

TV

TV

TV

TV

AUD1

AUD2

CBL/SAT

CBL/SAT

CBL/SAT

CBL/SAT

CBL/SAT

AUD1

AUD2

VCR

VCR

VCR

VCR

VCR

AUD1

AUD2

DVD

DVD

DVD

DVD

DVD

AUD1

AUD2

AUD1

AUD1

AUD1

AUD1

AUD1

AUD1

AUD1

AUD2

AUD2

AUD2

AUD2

AUD2

AUD2

AUD2

To reset the volume controls to the original device code:

1.While holding down the RECALL button, press 9 –9 –3.

2.Press VOL z.

The Mode indicator will blink four times (unlocked).

Operational feature reset (980)

This feature clears all setup features not related to “Device code set up” and resets the Volume Lock to “TV.”

To reset the features:

While holding down the RECALL button, press 9 –8 –0. The Mode indicator will blink two times, and then pause and blink two more times.

Number

MODE

VOL y z

RECALL

16