1 TROUBLESHOOTING FOR THE HARDWARE
Do not touch the fuser unit or the metal portion around it.
Do not touch the fuser or the metal portion around it when you remove the jammed paper from the fuser unit. This could burn you or the shock could cause you to get your hand injured in the machine.
Do not touch the transfer belt.
Do not touch the transfer belt when you remove the jammed paper inside the right of the equipment. Doing so may cause damage the equipment or result in a poor output.
If paper jams occur frequently
The following are the common causes of paper jams. If the problem persists, check for the following situations.
yAn unsuitable original is placed on the Reversing Automatic Document Feeder.
yUnavailable paper with the equipment is used.
yPaper sizes are not consistent between the size in a drawer or the bypass tray and the size registered in the equipment.
yAll the jammed paper has not been removed.
yThere is too much of a gap between the paper and the side or end guide in the drawer.
yThe amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.
Paper jam in the Reversing Automatic Document Feeder
1 Raise the lever and open the upper cover.
2 |
1 |
2 Remove the original.
Clearing a Paper Jam 13
