81
Chapter 8: Using the TV’s features
62HM15
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Adjusting the audio (continued)
________
WOW, SRS and symbol trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
Using the SRS WOW surround sound
feature
WOW is a special combination of SRS Labs audio technologies
(SRS 3D, FOCUS, and TruBass) that creates a thrilling
surround sound experience with deep, rich bass from stereo
sound sources. Your TVs audio will sound fuller, richer, and
wider.
To adjust the WOW settings:
1. Put the TV in STEREO mode (see Selecting stereo/SAP
broadcasts on page 79).
2. Press MENU and open the AUDIO menu.
3. Highlight ADVANCED AUDIO SETTINGS and press
ENTER.
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Reset Save
SRS WOW:3D
SRS WOW:Focus
SRS WOW:TruBass
Off
Off
Off
Done
Advanced Audio Settings
4. Press z or y to highlight the WOW feature you want to
adjust, and then press x or to adjust the item.
3D To turn the surround sound effect on or off.
Note: If the broadcast is monaural, the 3D effect does not
work.
Focus To turn the vocal emphasis effect on or off.
Tru Bass To select the desired bass expansion level
(HIGH, LOW, or OFF).
5. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To reset the WOW settings:
Highlight RESET in the Advanced Audio Settings menu
and press ENTER.
Reset Save
SRS WOW:3D
SRS WOW:Focus
SRS WOW:TruBass
Off
Off
Off
Done
Advanced Audio Settings
Turning off the built-in speakers
Use this feature to turn off the TV speakers when you connect
an audio system to your TV (see Connecting a digital audio
system and Connecting an analog audio system on page 20).
To turn off the built-in speakers:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3. Press z to highlight the SPEAKERS field, and then
press to select OFF.
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turn on the built-in speakers:
Select ON in step 3 above.
Selecting the optical audio output
format
Use this feature to select the optical audio output format when
you connect a Dolby Digital decoder or other digital audio
system to the OPTICAL AUDIO OUT terminal on the TV
(see Connecting a digital audio system on page 20).
To select the optical audio output format:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
3. Press z to highlight the OPTICAL OUTPUT FORMAT
field, and then press to select either DOLBY DIGITAL
or PCM, depending on your device.
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
#01E076-081_62HM15 5/24/05, 6:21 PM81
Black