Toshiba 3LCD, 650 manual

3LCD DATA PROJECTOR

QUICK REFERENCE CARD

“Camera” function is equipped only with the model which has a document imaging camera model.

Projecting a Picture

1 • Connect external equipment such as a computer or video tape player.

•Connect the power cord to the projector.

2	ON/STANDBY	Press ON/STANDBY.
		Both the ON and LAMP indications light up
		in green.
3		Turn on the connected equipment
		and put it in playback mode.

4	INPUT	Press INPUT to select the
		input source.
		Video:	VIDEO input picture
		RGB:	RGB input picture
		CAMERA: Camera input picture

	Adjust the picture size and
5	focus.
	Zoom ring:	Adjust the picture size.
	Focus ring:	Focus the picture.

Projecting Images with the Document Imaging Camera

1 1) Raise up the arm. 4) Open the camera head.

5) Turn the camera head.2) Stretch the arm.6) Pull up the light.3) Turn the arm.7) Turn the light.

After using, return the arm to the original position in the reverse order.

2	ARM LIGHT	Press ARM LIGHT.
		The light turns on.
3		Place a document onto or
		around the projector, and turn
		the camera head to direction
		of the document.
4	CAMERA	Press CAMERA.
		The appeared image is a projected one
		through the camera.
5		Move the camera head to
		adjust the size of the picture,

and focus on the picture by turning the focusing ring on the camera head.

Up : to reduce.

Focusing ring

N : Near

F : Far

Down : To enlarge.

Turning Off the Power After Use

1		Put the connected equipment
		in the stop mode.
2	ON/STANDBY	Press ON/STANDBY.
		An instruction message appears.

3	ON/STANDBY	Press ON/STANDBY again.
		(Power turns off and then the lamp goes off.)
4		After confirming the exhaust fan
		stops, unplug the power cord.

For more informations about usage and operations, see the owner’s manual.