110 Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.3
The computer saves the state of the system, including all open
programs and files, to the hard disk. Then the computer turns
itself off.
Going into Hibernation mode more quickly
You can also put the computer into Hibernation mode in the
following ways:
❖By pressing the hotkey combination Fn + F4.
See “Hibernation mode” on page 201.
❖By pressing the power button
❖By closing the display panel
To put the computer into Hibernation mode by pressing the
power button or closing the display panel, you must preset the
mode.
1Open the Start menu, click Control Panel, then
Performance and Maintenance.
2Click the Toshiba Powe r Saver icon.
3Click the Setup Action tab.
The TOSHIBA Power Saver Properties window appears.